PCB separator machine with completely independent development and controlled by microcomputer process the machine is very accurate and stable. It can cut a single board within the length from 0 to360mm off with a cut.
Manufacturer: ASCEN technology
Certification: CE
PCB separate machine model 509 :
1)after soldering the PCBA plate of connecting pieces, it often hurts lines or breaks the electronic parts when breaking. This PCB V-cut separator cuts PCBA with feed mode to reduce stress drastically, prevent the solder joint and parts from cracking and improve the productivity and quality.
2)With circle knife above and anvil blade below, when the board flow to the anvil blade, shift the switch, and the anvil blade move laterally to the set point, then the PCB board is cut off with smooth incision and no burrs.
PCB separate machine features:
*V-cut PCB separate machine with completely independent development and controlled by microcomputer process, the machine is very accurate and stable. It can cut a single board within the length from 0 to360mm off with a cut.
*The feeding speed is adjustable with 500mm/s and 300mm/s. If the speed is fast enough, the quality is improved for the board is cut without burrs and rough selvedge .
*The feed distance of the knife wheel is from 0 to 360mm(the tool length can be customized ) . The height of the knife wheel is finetuning from 0 to 2mm so that it is suitable for PCB of various kinds of thickness and the depth of VCUT groove. The height of work station is regulable from 0 to 50mm.
*The forward and stop point can be set according to the plate length when feeding, the stop point for artificial setting.
*The tailgate depth range: unlimited. The largest plate cutting width: unlimited, the maximum cutting length: 360mm, the plate thickness: 0.25.0mm. The thickness between V groove: 0.252.0mm.
*The upper and lower knives is made of imported highspeed steel material, which are durable and can be regrinded .
*PCB separator machine 509 model can be in supporting use of a complete set of conveyor belt, which is convenient for the cut PCB to be send out automatically .
*The platform is adjustable. It is good for the product quality when lifting the platform, because it will reduce stress and will not hurt the product.
*The spacing device applies to products of different size, so as to improve the work efficiency.
Item
Scope of application
Model number
ASC-509 (with conveyor belt transfer)
Separator size
1060*465*445mm
Packing size
1180*520*480mm
Knife material
imported highspeed steel
Cutting speed
300,500mm/s
Cutting thickness
0.25mm
circular knife size
125mm(diameter)
Blade length
370mm(length)
Voltage
AC220/110V 50－60HZ
Machine weight
65kg
Packing weight
92kg
Power
40W
Note : Your information detail will not be published. Required fields are marked
